Detail Mini Tilt & Rotate 80mm

Product Code:     DMR

This product is unique because it rotates 360 degrees (and tilts 28 degrees) within the fitting without using a cage. This taken with an outer bezel rim of only 1.0mm (before paint) makes the bezel exceptionally discrete and a market leader for a mini-sized bezel.

This product is part of the Mini Recessed Detail family. These products have an 18mm deep full-length inner and outer shield baffle. These full-length baffles reduce glare – especially when the snoot is tilted.

This Detail range took a large amount of care and attention to get exactly right so that it looks “discrete and light” in the ceiling. The solution was an outer baffle of only 0.7mm and a sloping receptor to reduce the shadow gap.

Now available with Jigsaw plaster-in accessory.

Detail Mini Tilt & Rotate 80mm

Images

Right click to save fullsize
versions
Detail Mini Tilt & Rotate 80mm Detail Mini Tilt & Rotate 80mm Detail Mini Tilt & Rotate 80mm Detail Mini Tilt & Rotate 80mm Detail Mini Tilt & Rotate 80mm Detail Mini Tilt & Rotate 80mm

Downloads

Datasheet - Detail Mini Tilt & Rotate 80mm
Installation - Detail Mini Tilt & Rotate
Installation - Jigsaw
TM-30-15 Engine Data
Installation Datasheet - FirePlate

Wiring Diagram - 2 Lights Per Driver (0-10V and DALI Only)
Installation - Standard Emergency Mains
Installation - Standard Emergency DALI
Installation - Standard Emergency 0-10V
Installation - DALI Addressable Emergency DALI
Installation - Self Test Emergency Mains
Installation - Self Test Emergency DALI
Installation - Self Test Emergency 0-10V
LDT - 10DEG Recessed - 10°
LDT - QUAD50 Recessed - 20°
LDT - QUAD70 Recessed - 20°
LDT - QUAD90 Recessed - 20°
LDT - QUAD50 Recessed - 30°
LDT - QUAD70 Recessed - 30°
LDT - QUAD90 Recessed - 30°
LDT - QUAD50 Recessed - 46°
LDT - QUAD70 Recessed - 46°
LDT - QUAD90 Recessed - 46°
LDT - 10DEG-C Recessed - 10°
LDT - QUAD50-C Recessed - 20°
LDT - QUAD70-C Recessed - 20°
LDT - QUAD50-C Recessed - 30°
LDT - QUAD70-C Recessed - 30°
LDT - QUAD50-C Recessed - 46°
LDT - QUAD70-C Recessed - 46°

Email enquiry »

TM-30-15 Rf 90 Rg 98
95CRI Engines

  Quad50-C Quad70-C 10Degree-C
Lumens* 684lm 962lm 544lm
Lumens/cw 75 84 62
Circuit Watts 9.2W 11.4W 8.8W
CRI 95 95 95
Beam Angles 20º/30º/46º 20º/30º/46º 10º
Fire-Rated Option Option Option
IP65 Option Option Option

 

85 CRI Engines

  Quad50 Quad70 Quad90 10Degree
Lumens* 696lm 948lm 1249lm 544lm
Lumens/cw 76 83 110 62
Circuit Watts 9.2W 11.4W 11.4W 8.8W
CRI 85 85 85 85
Beam Angles 20º/30º/46º 20º/30º/46º 20º/30º/46º 10º
Fire-Rated Option Option Option Option
IP65 Option Option Option Option

*Delivered lumens post optic and post reflector

 

Red, Typical 87
Red values for LEDs can be misleading. Typically an LEDs ability to render red tones sucessfully is only based upon the CRI R9 value, this reference colour is a single tone of red. TM30 measures 99 colours, of which 12 are red tones. Orluna shows the typical value for these 12 red values as its measuremnt for red rendering quality.

Sparkle
Looking for the intense sparkle produced by a multi-point light source combined into a single, brilliant beam? Then look no further.

Our patented mixing chamber pairs a metalised reflector with a prismatic glass lens to mimic the stunning effect achieved with halogen dichroic. We are not aware of any other product in the market which achieves this, making our products well-known for their sparkle.

Colour consistency
Our colour temperature consistency is guaranteed to be less than a young human eye can differentiate. At 1.5 MacAdam ellipse our consistency is the best available in the market – including remote phosphor products.

Making it simple
To make choosing Orluna even simpler, our range is entirely modular so all our light engines work with all our bezels – specifying has never been easier!

Fire-rating
All the products in our range (excluding only the Recessed Square bezel) are available with an independent 60 minute fire-rating.

IP-rating
All products are IP44 as a minimum. All our fixed baffle products are available with IP65 rating.

Bespoke bezels and finishes
As a UK manufacturing business, bespoke products and finishes are available. For example, whilst all products come with a light textured white powder-coat paint as standard, any bezel or baffle is available in any RAL.  Most products are also available in brushed and polished chrome as well as anodised finishes depending on bezel material.

Low void installations
A low-void heatsink option is available – please see dimension drawing above for clearance measurements.

Detail Mini Tilt & Rotate 80mm
Detail Mini Tilt & Rotate 80mm
Detail Mini Tilt & Rotate 80mm
Detail Mini Tilt & Rotate 80mm
Detail Mini Tilt & Rotate 80mm
Detail Mini Tilt & Rotate 80mm